Results 1 to 9 of 9
Threaded View
-
12-21-2016, 03:00 PM #4
- Join Date
- Apr 2016
- Posts
- 120
Worth printing from USB and seeing if it works. I doubt it will TBH.
You should however be able to connect to the machine and view the control panel. This will tell you if it's a display fault - or the main board. If you cannot connect, suspect the main board, but check you have the correct drivers etc. for the printer first.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion