Results 1 to 6 of 6
Threaded View
-
12-18-2016, 08:03 PM #1
- Join Date
- Dec 2016
- Posts
- 43
Slicer Settings for easy to remove supports
I was using version 0.9.9 and recently switch to 1.29. My biggest issue is mastering the support settings, I expect to have to do some work, but in some cases its a real pain, does anybody have settings they have found good to weaken the bond of the supports. Thanks.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)