Results 1 to 3 of 3
Threaded View
-
11-26-2016, 09:16 PM #1
- Join Date
- Oct 2016
- Posts
- 5
Turnigy fabrikator bed cools down when printing
Hi,
I have a turnigy fabrikator. Everything works but after about 5 mins of printing the bed cools down from 100C to 82C. My extruder can only print abs so I am in a bit of a tight spot. any way I could stop that or print abs at that bed temperature?
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)