Results 1 to 10 of 14
Thread: Bed Temp not accurate
Threaded View
-
10-20-2016, 09:13 AM #1
- Join Date
- Dec 2014
- Location
- Canada
- Posts
- 498
Bed Temp not accurate
Im running into a issue where i set my bed temp to 80 and the display says 80. but when i measure the bed temp with two different thermometers/readers it says around 55, i have to compensate by setting it to 110 to hit close to 80
I have marlin set to use
#define TEMP_SENSOR_BED 1
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
I assume this is what came with my printer
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)