Results 1 to 10 of 16
Thread: Possible FAQ questions.
-
05-12-2016, 01:01 PM #1
- Join Date
- Jan 2016
- Posts
- 14
Possible FAQ questions.
FAQ probably lacks questions people want answered that are for Rylan not discussion.
My question is about cost of money missing before project completion. Is it even less than David Boe owes us?
Total cost on parts for 5000 printers you have 600 (Its about time we knew what has been pre-paid for)?
Approximate labour cost for all 5000-ish printers?
Juice and shipping money was never going to peachy or research, how much money should still exist for that?Last edited by Alchemy; 05-13-2016 at 04:33 PM.
-
05-13-2016, 07:54 AM #2
- Join Date
- Jan 2016
- Posts
- 14
I thought people might add questions. Seems many things missing.
Can you get pictures of prints from the January beta testers?
What technical problems were reported by Januarys testers.Last edited by Alchemy; 05-13-2016 at 04:35 PM.
-
05-14-2016, 02:59 AM #3
- Join Date
- Apr 2016
- Posts
- 17
I completely agree with you. I would like to hear from the first 10 because I'd like to know if it was fake accounts as part of the scam. I'd like pictures of prints too, and then get the parts I bought. I'd even pay the cheap shipping to get them to me from Ryland, since he says he has them but can't afford to ship them.
Last edited by Very Equipped; 05-14-2016 at 03:36 AM.
-
05-14-2016, 04:20 AM #4
- Join Date
- Oct 2013
- Location
- nsw australia
- Posts
- 81
as a BETA tester, the issues I found were (in the original peachy the connections to the coils not being preactical for an ordinary person fix was to put coils on boards with pin headers) and two managed to break one of the coil board holders on the armature assembly, possible re-design of armature assembly to stregthen the suoorts for the coils).
I have not actually used the peachy for printing so have NO test prints as I will not connect the peachy till I have designed and constructd an adequatly laser tight(and water tight) cabinet for the printer as I do NOT want ANY salt water getting to ANY of my computers
-
05-14-2016, 04:29 AM #5
I was one of the first 10 but I didn't get a peachy. Rylan messaged me to let me know there was a delay due to certification. Then we all know what happened...
-
05-15-2016, 04:38 AM #6
- Join Date
- May 2014
- Location
- hiding in your pillow
- Posts
- 52
same here, chayat.... but then, we 10 weren't beta testers - we were just supposed to work out any kinks in the final product. AFAICT, the only people in that list of 10 that got their kits were the people in canada, because customs apparently seized the first couple they sent into the usa...
-
05-15-2016, 08:16 AM #7
- Join Date
- Oct 2013
- Posts
- 110
Actually, I'm pretty sure that at least two people in Australia got kits too. I was one of them, and if I remember correctly there was someone in Sydney due to get one too.
Unfortunately it took a very, very long time to arrive - if I remember correctly it finally turned up in late March, just before I headed overseas for a holiday. Since then a combination of work and personal commitments has meant that building Peachy isn't a high priority, so it's still in its box (but on the to-do list).
-
05-15-2016, 11:09 AM #8
- Join Date
- Apr 2014
- Posts
- 13
I got one from my Backerkit order in Feb 2014. Did not build because I did not see evidence that it was worth my time. For example, after I got my kit, the audio output was abandoned. Good idea, but it meant I was better off waiting for the final design than wasting my time. There also was really no evidence that any other Beta testers built them--beyond one or two. The only prints I saw coming out (very few) were problematic, especially with holes in surface.
I'm guessing if there is truly useful technology here that does not already exist in the outside world, that it will be quickly incorporated by people in the build your own sla community. There is a forum on top down builds that you can check out here: http://www.buildyourownsla.com/
Since I don't plan to build it at this point, I'm selling my Peachy Printer Beta kit: http://www.ebay.com/itm/222115287108?
-
05-15-2016, 11:10 AM #9
-
05-15-2016, 11:14 AM #10
- Join Date
- Jun 2014
- Location
- Burnley, UK
- Posts
- 1,662
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help