Results 1 to 2 of 2
-
05-11-2016, 04:29 PM #1
- Join Date
- Feb 2016
- Posts
- 3
Does the software for the USB version exists ?
Hi all,
I received an USB version of the kit last month, so it seems to be what was supposed to be the "final version", but I still have not finished to build it, and I was wondering if the software to pilot it exists somewhere ?
I have read most of the thread speaking about software, but I am not sure if what can be found on the github is compatible with this version of the hardware...
Regards,
Seb
-
05-12-2016, 12:14 PM #2
- Join Date
- Sep 2013
- Posts
- 6
Hey Redox,
Here is the web page that links to software dl, instructions, and the peachy forum:
http://www.peachyprinter.com/#!get-started/en0zq
As long as you haven't upgraded the firmware on the board, that link should just work.
Good luck with the build!Last edited by NathanGrayston; 05-12-2016 at 12:17 PM. Reason: forgot to mention something...
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help