Results 1 to 9 of 9
Thread: Removing ABS Slurry
Threaded View
-
01-15-2015, 10:47 AM #1
- Join Date
- Jan 2015
- Posts
- 5
Removing ABS Slurry
So I have a box I am printing on my FF Pro with ABS, Glass, and ABS slurry. Print is 100% proper except the face that is on the bed when its done printing has a layer of ABS slurry on it. I can turn the print on a different side that would not cause a problem, but then need to add support and increases print time by around 5 hours. Any suggestions would be great.
Thanks in advance!
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help