Results 1 to 10 of 20
Thread: Advice on my watercooling setup
Threaded View
-
12-16-2014, 04:57 PM #10
- Join Date
- Dec 2013
- Posts
- 8
Is that speaking from experience or a personal hypothesis?
Stratasys printers don't have a heated bed, so you'll have trouble printing PLA on them - either you'll have to heat the chamber and the hotend will jam, or you'll have to print on a cold bed and you'll get part warp.
PLA has a Tg of 60C, which is where you'd want to set the heated bed (but you can't, and setting the build environment to the polymer's Tg = jammed hotend)
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials