Results 1 to 4 of 4
Threaded View
-
11-06-2014, 04:44 PM #4
You want the probe to be as close to the nozzle as practical, but your numbers are going to be fine. Think of it this way. You used to be able to print just fine without Auto Bed Leveling. You might have to adjust the bed once in a while, but it worked. Once you get the Z height dialed in correctly, you won't have to mess with the bed any more.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials