Results 1 to 7 of 7
Hybrid View
-
10-25-2014, 02:54 AM #1
- Join Date
- Jun 2014
- Posts
- 74
I never have a problem with breakage if I remove prints between 30 and 40c. 30c is generally a little easier to do just a little pressure by hand. At 40c sometimes I need to use slight pressure with a blade but never break or warp a part. Much above 40c gets difficult and risky if a thin walled part.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials