Results 1 to 10 of 10
Thread: Trying to solve a Z offset
Threaded View
-
10-19-2014, 07:52 PM #2
- Join Date
- Jul 2014
- Location
- Eastern Colorado
- Posts
- 536
So your Z offset is 1.8. Do you have a Z_RAISE_BEFORE_HOMING, Z_RAISE_BEFORE_PROBING , or a Z_RAISE_BETWEEN_PROBINGS number set?
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion