Is RepRap Morgan the next default RepRap?

[RepRapVN]

Thanks Nicholas. RepRap wiki says the Morgan is going to be the default: http://reprap.org/wiki/RepRap_Morgan . RepRap Wally seems to cost much for PLA: "Printing Wally is no small task. The printed parts take almost 1kg of PLA and 40-45 hours to print a complete set. Nicholas Seward recommends PLA printed at a 0.3mm layer height and 15% infill with 3 perimeters." (http://reprap.org/wiki/Wally) . I think Wally won't be the default RepRap until it takes less PLA.