Issue With New 3D Printer (Reprap Prusa i3)

[mavlock]

Hello,

Thanks for all the help I have received. You'd be glad to hear it's working now and I am getting some promising results! The issue previously with the extrusion was that I was sent a free sample of filament, which was ABS, and my settings were for PLA so it wasn't melting.

I have been using hairspray on the bed and here are my completed prints (the fan cover is the first one I did, a bit rough done on 0.3mm print quality with 210c on extruder and 70c on heated bed.

photo 2.jpg photo 1 (1).jpg photo (7).jpg

Any tips on making them smoother whilst printing just let me know!

Thanks for everything! Wouldn't be working without you, so feel pride in knowing that these are a result of your knowledge!
Markus

P.s. Ignore the pump which was randomly attached and I cannot remove!