Results 1 to 4 of 4
Hybrid View
-
03-27-2024, 02:41 AM #1
- Join Date
- May 2020
- Posts
- 626
Suggestion........
Print some random one layer thick 50mm squares at 0.2mm layer height. Examine the result.
Then increase or decrease the 'Z' offset in 0.01mm incriments at a time and check results.
-
03-27-2024, 06:06 AM #2
- Join Date
- Mar 2024
- Posts
- 3
I'll try this one!thnx Bikeracer2020
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion