Results 1 to 2 of 2
Thread: Strange Layer shift problem
Hybrid View
-
03-17-2024, 07:48 AM #1
- Join Date
- Mar 2024
- Posts
- 3
So, for anyone also experiencing this issue i found the problem.It was the TMC2208 stepper drivers overheating. I noticed when opining the electronics that the small fan blowing over the stepper drivers had died. getting the fan for cooling the Stepper drivers up and running again fixed my issue.
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help