Hi All,

any advice on reduction of predominant seam on outside of a dome \ half pokeball would be welcome.
I am getting an ugly seam at the back and as the circle path decreases as the dome gets higher, the gap seems to widen in cura preview?.
It matches what i am seeing printed.
I am running cura 5.4 & using an ender 3 V2 to print one half of a pokeball for my grandchild. I am placing the dome \ pokeball largest radii down.

Previewing the slice, the top of the dome seems to get wider on the gap (becomes green\yellow in pic) between lines. I am suspecting an algorithm error in the slice - as the circle decreases, the lines should remain same distance - they dont.

Screenshot 2023-08-07 234045.jpg
Is there a way to cure this or is it a well know issue.
I cant understand why it produces a seam unless the movement within the program to next layer has a blip factored in.
Can you slice a program to not have a white seam as in image?.
I program CNC routers in industry for a living so have some background on graphi-code \ machine paths.

thanks
Rich