Results 1 to 10 of 12
Threaded View
-
04-17-2022, 10:02 AM #7
- Join Date
- Apr 2022
- Posts
- 9
I had the printer shut off most of the day yesterday and all night and now the symptoms changed a little. The first print which I didn't get a video of printed almost the entire first layer before it stopped advancing the filament. I then ran it again, 2 more times and got the videos for both:
https://youtu.be/7XwexprWnWM
https://youtu.be/fAUvXoLnSP4
*edit*
When the issue first came up and I had a few failed prints in the exact same spot in the exact same way, I thought it may have been a corrupted gcode file so I respliced and retried a few times, even used a different SD card but nothing changed. That's when I went to testing the block that had previously worked before this.Last edited by kaotkbliss; 04-17-2022 at 10:20 AM.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials