Results 1 to 10 of 189
Thread: Show your MODS
Hybrid View
-
07-22-2016, 10:32 AM #1
- Join Date
- Oct 2014
- Posts
- 134
This time elapsed between the first two prints that succeed and the following prints that fail is less than one hour - moisture is not the problem.
-
07-22-2016, 10:41 AM #2
- Join Date
- Jul 2016
- Posts
- 43
-
07-22-2016, 12:31 PM #3
-
07-22-2016, 12:44 PM #4
- Join Date
- Jul 2016
- Posts
- 43
This used to cause me issues but mainly with layers not bed adhesion. Worth a try checking into.
-
06-26-2017, 11:24 AM #5
- Join Date
- Mar 2015
- Location
- Yes
- Posts
- 15
Direct drive Prusa i3V with Hexagon hotend
Greetings all,
Here is a little something I fabricobbled over the last couple weeks. I converted my older i3V from the Greg's wade extruder to a direct drive; mostly because I have gone through several of the big spur gears over the last year due to them getting a bit too hot inside the enclosure I am forced to use to keep ABS prints from warping.
It took a bit of tweaking but it works, and much to my chagrin, it works pretty well. I was able to get it working the Hexagon hot end that originally came with the printer. It seems to push 3mm filament ok so far, (I have a lot of 3mm filament that I don't want to waste but will be switching to 1.75 as soon as I run through it all) All in all I'm pretty happy with it and thought I would share.
IMG_6748 (2).jpg
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials