Can Eny Help me out a drawing

[maxmekkeer50]

The inner lip appears to be 1.37 mm thick. This is the outer part of the lip. The lip should turn out and have a slight slant, but does it have a sloping inner edge? My picture did not show the profile. 4.5 mm is the total width of lip What represents 3.5 mm is the quarter circle lip is 1.37mm thick overall height is 2.30mm and 4.5mm dimensions? It seems that you need a total height of 2.3 mm. Can you confirm that this is correct? The size of 101 mm applies to the outer diameter include the lip

[fred_dot_u]

dimension request two.jpg
What are dimensions: D, E, F ?

I understand that the center of this circle is to the left, while my first model has the center to the right.

[maxmekkeer50]

F 1.37 mm E 1.5mm D1.0mm