Results 1 to 4 of 4
Hybrid View
-
11-12-2017, 11:39 AM #1
- Join Date
- Nov 2017
- Posts
- 2
Thanks for the reply. I did forget to mention that info. It was PLA and I believe the speed was set to 50mm/s. They were 4mm columns with 1mm holes. The only belt that might be only slightly loose is the E-axis extruder belt but im not sure how to tighten it.
Last edited by Plzwork123; 11-12-2017 at 01:31 PM.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials