Results 1 to 2 of 2
Hybrid View
-
09-07-2017, 07:22 PM #1
- Join Date
- Jul 2015
- Posts
- 19
turns out it was a z-axis offset issue. increasing extrusion multiplier and overlap was a bandaid. honed it down to a .1mm offset.
turns out it was a z-axis offset issue. increasing extrusion multiplier and overlap was a bandaid. honed it down to a .1mm offset.
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials