Heaven help me - I've just bought a delta kit :-)

[curious aardvark]

Just fitted the cable snake - yep that works :-)

cs1_216x480.jpg

cs2_627x480.jpg

cs3_560x480.jpg

cs4_329x480.jpg

I fixed the cable in at the bottom with a small black cable tie. Was going to do the same at the top - but doesn't seem to be necessary :-)

I'll upload stl and scad to thingiverse :-)
Looks great in operation - moves back and forth. As i tunrs out I could actually have got away with a much steeper angle on the connector tab. Which would have printed cleaner.
Who cares, it works :-)

I'll change it for the stl upload.

Changed it from 30 degrees to 50 - yep that'll print a lot easier :-)