Results 1 to 10 of 10
Thread: Using Cura for Pegasus printers.
Hybrid View
-
05-13-2017, 09:40 PM #1
- Join Date
- Feb 2017
- Posts
- 12
Since I posted that, I've pretty much switched over to Cura 2.5 exclusively for slicing (pronterface for sending G-code) and am pretty happy with the results. For PLA, I'm printing with a 70C bed, 200C hotend, .4 mm nozzle, 2.5mm layer. First layer is .4mm at 50% speed (30mm/s).
Try turning on bed heat. You can just start it via the LCD panel or pronterface before the print or put it in the start G code. Hairspray on 3/16" glass and I've never had a problem with adhesion. Interestingly, the PLA parts pop off when the bed drops to 60C. Before that they are pretty welded to the plate.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials