Results 1 to 4 of 4
Thread: Trouble slicing large stl file
Hybrid View
-
03-20-2017, 06:07 AM #1
going to need your printer settings.
The individual parts are too small and while it slices in about 1 second in simplify3d. It's just blank as the cell walls are way way too small for my printer settings.
Without knowing what ridiculously small settings you're usig I can't actually get a sliced model.
-
03-21-2017, 02:46 AM #2
- Join Date
- Oct 2015
- Posts
- 35
So if I've got this correct, you've got a 50x50x0.8mm geometry made up of lots of sections of 0.2-0.7mm.
I don't know which technology you are planning to use, but you are going to struggle with most of them at this scale, and if successful it will not be very accuratedetail-1.jpg
As CA said above, what settings are you trying to process this with? It might help us understand whether it's achievable.
Rich
Please explain to me how to...
Yesterday, 02:43 PM in 3D Printer Parts, Filament & Materials