Results 1 to 1 of 1
Thread: Extrusion Problems
-
03-01-2017, 06:23 AM #1
Extrusion Problems
Everything is with a prusa i3 and Marlin Firmware
Just wondering what speed I should be running a bowden extruder at. Could i please have the answer with the coding lines and numbers please. If it would help I can post the relevant (what i hope is relevant) sections of my current code.
The hardware issue is just my extrusion is jamming the nozzle and is just creating a big blockage. This I hope can be solved with a firmware fix.
I'm willing to try almost anything at this stage to get it up and running.
Thanks
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help