Yes they are, I just got a notification on that1

Quote Originally Posted by towatson View Post
I tried the makeprintable.com but it looks like they are off-line to come out of beta. The material is ABS with nozzle at 230 and bed at 110 C. I did the print via USB but tried a subsequent version off SD card with similar but not the same results. The print speed is 3600 mm/min. X/Y Axis movement 4200 mm/min and Z axis movement speed 1200 mm/min. Both of failures happen at similar Z axis height of about 1.7 - 2 inches in height. I have changed the overall height of the model by two inches and changed the slope of change in diameter. I am printing this third version from USB too.