Results 1 to 10 of 13
Thread: Layers not smooth
Hybrid View
-
12-27-2016, 12:22 PM #1
- Join Date
- Apr 2016
- Posts
- 120
Looks like some play in one of the axis. There is a bit of wobble going on as well.
I don't think that temperature is a problem and TBH 1 degree is less than the stable temp that the printer will sustain anyway. You will find if you measure it that is will vary by about 3-5 degrees over the plate (Quite possibly more) and will cycle over a similar range due to the binary nature of the heating.
-
12-27-2016, 12:36 PM #2
- Join Date
- Dec 2016
- Posts
- 11
Shouldn't wobble affect all sides? One side along the same axis is smooth, but the other side is not.
Please explain to me how to...
Yesterday, 03:08 PM in 3D Printer Parts, Filament & Materials