Results 1 to 10 of 13
Threaded View
-
12-05-2016, 04:58 PM #7
- Join Date
- Dec 2016
- Posts
- 10
I have to disagree on the Delta style and difficulty in use. I own and put together a RostockMax V3 and the setup was painless and the calibration was even easier. Couple that with superior customer service and high quality parts and you have a world class printer for under 1k. Some delta's are crap, but not all. Seemecnc has the good ones in my opinion.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion