Maybe ANOTHER UNSATISFIED CUSTOMER GERMANREPRAP CRAP X400!

[Dontknow]

SOME OF THE PROBLEMS:

The great problem that even today I am facing with GRR CRAP is that Z-Axis refuses to function... Ok... Actually I made it work but still there are too many issues that I want to rectify and troubleshoot and will make it in order to have a descent print job...

The Steel Plate's Holes were not centered so the Z-AXIS BOLT (Ball Screw) had enough friction and squeezing so the NEMA17 stepper was actually straggling to elevate or move downwards the plate...


The STEEL PLATE that holds the Heating Bed is too heavy in my opinion and the NEMA17 stepper is let's say oriented especially if you are going to print a 400 x 400x 350(mm) part.... Of course the good news are that plate is going down when printing so the gravity will help the NEMA17....