Results 1 to 10 of 57
Thread: BL Touch and Makerfarm.
Hybrid View
-
10-28-2016, 10:19 AM #1
Bob, if you load up the RC-8 (Release Candidate #8) of Marlin, there is an easy to configure BLTouch option. You pretty much just tell it you have a BLTouch, and give it the correct Offsets from the nozzle and you are done.
https://github.com/MarlinFirmware/Marlin/tree/RCBugFix
-
10-28-2016, 11:37 AM #2
- Join Date
- Jul 2016
- Location
- Pennsylvania, USA
- Posts
- 255
Since RC-8 is a few days(?) old, what's been posted over the last 12 months has been struggling with a variety of RC-X issues as well as basic "this is my first bed level" stuff. Hopefully the word will get out on RC-8 since it does indeed take care of roughly 95% of the stuff that has been posted with about three lines to modify.
Bob
-
11-13-2016, 10:59 AM #3
- Join Date
- Jul 2016
- Location
- Pennsylvania, USA
- Posts
- 255
-
11-13-2016, 11:11 PM #4
Yeah... I apologize. Please grab the current contents of the https://github.com/MarlinFirmware/Marlin/tree/RCBugFix branch. For all practical purposes that IS RC-8. We just haven't checked with each other and all shaken our heads up and down. Trust me... That is so close to what RC-8 will be, it won't matter.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials