Results 1 to 9 of 9
Thread: 10" Pegasus extruder issues....
Threaded View
-
10-23-2016, 01:32 PM #8
- Join Date
- Mar 2015
- Location
- Yes
- Posts
- 15
Well there was a small peice of paper in with one of the boxes of parts that had E-Steps 814.xxx so I foolishly assumed that that was the proper setting for the extruder. Now i need to get less scared of mucking about in firmware to get the 100 to stick as it resets to 814 when ever the printer is reset or power cycled.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials