Build Plate Alternatives for Flashforge Dreamer New in DEC 2015

[curious aardvark]

First off you don't need anything that will plug into the heatpad.

I've got a 3mm aluminium plate on top of the original warped plate and then printbite on top of that.
http://3dprintboard.com/showthread.p...ntbite-surface

I just have to add 10c to the temp I want the bed at in simplify3d - or whatever slicer you're using.

[Les]

First off you don't need anything that will plug into the heatpad.

I've got a 3mm aluminium plate on top of the original warped plate and then printbite on top of that.
http://3dprintboard.com/showthread.p...ntbite-surface

I just have to add 10c to the temp I want the bed at in simplify3d - or whatever slicer you're using.

Thnx for the info - I went to the site and figured out the 3 alternatives and the HT looks like the one is the one you mentioned. Order placed a few mins ago to arrive 3-5 days and then we shall see