Results 1 to 10 of 17
Thread: PETG Retraction tests etc
Hybrid View
-
08-20-2016, 07:56 PM #1
- Join Date
- Jan 2015
- Posts
- 445
strangely enough that had an adverse effect... I ran at 40mm/s print speed, 40mm/s travel speed, and 50mm/s retraction speed and it was one of the worst tests I had run... lots of stringing and globs at the top of each spire. going to run another control test at 25mm/s with the same settings/
Please explain to me how to...
Yesterday, 10:55 PM in 3D Printer Parts, Filament & Materials