Quote Originally Posted by BLKKROW View Post
If anyone ever needs the proper way to assemble the E3D V6, use the following video:

https://www.youtube.com/watch?v=xr02pG58gaU

This shows you how to assemble it so the heat break creates a natural seal with the nozzle. Using this method I have never needed Teflon tape.
Hi

If you attempt to follow the process he shows, you can't execute the steps when you need to within the MakerFarm instruction and build approach. The hot end / teflon goes into the extruder *many* pages before anything at all is done with the electronics. It's actually quite difficult to do that way within the kit build..

Bob