Results 1 to 10 of 21
Threaded View
-
08-03-2016, 01:46 PM #7
- Join Date
- May 2016
- Location
- SE Wisconsin
- Posts
- 206
On the subject, you guys think a PETG subframe could be designed to support 300+ lbs from 4 attachment points?
My original intent was to use internal aluminum tubing, but if I can make something that's totally printed, that would be great.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion