Results 1 to 9 of 9
Threaded View
-
04-13-2014, 01:45 PM #8
- Join Date
- Mar 2014
- Location
- Vienna
- Posts
- 47
From all the printers with a reasonable price, let´s say not over 1500,- EUR / 2000 USD I would like to have the Mendelmax 2.0
This printer is still an open source one and you can modify it. But it has a lot of improvements
- big printing area (230 mm x 310 mm x 225 mm)
- heated bed ( in that size!)
- linear rails (X and Y axis), precision shafting and bushing (Z axis)
- Resolution (X & Y Axis): 0.0125 mm (12.5 Micron)
At the end it is much more precise than most of the the mainstream printers - but it is an mainstream one!
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials