Delivery No.1 - Build blog of the first V1.0 Peachy Printer in the Wild

[dezi]

couldn't you combine both?
that scissor jack table with a stepper motor instead of manual adjusting the hight?
http://www.thingiverse.com/thing:1077164
http://www.thingiverse.com/thing:925556
I haven't checked what it would cost me to print it, but shouldn't be much more than 10-20€?
I think i will try to build a peachy after i have all my fdm printer working perfectly

[Builder1]

This would be worth it if you could get the scissor jack for cheap and adjust it manually during the print.

As soon as you start down the road of using a stepper motor (with stepper controller and Arduino), your 70% of the way to a proper motorized Z-Axis and the drip system becomes irrelevant. When I talk about a "proper Z-Axis" system, I'm referring to a system that will move the build plate ONLY once a layer is finished being printed. This is what you want. Now every layer gets printed and your not waiting for the resin level to "catch up" to the next layer.