Pegasus Z-coupler

[jackal24]

I am using a coupler on my Pegasus successfully.

I used longer bed springs and longer M3 bouts for the bed and raised the bed the 3-5mm needed to allow the use of couplers.

I am at work currently but I can provide pictures later if you would like?

That sounds like the perfect solution. I will probably use that idea, but with the stock springs and a spacer (and longer M3 bolts)

[BLKKROW]

That sounds like the perfect solution. I will probably use that idea, but with the stock springs and a spacer (and longer M3 bolts)

I had like 3-4 other solutions but they required a lot of work, so I decided on this method.

I also though about using spacers under the springs, but I thought the springs may kick the spacers out during a print and unlevel the bed. I found the longer springs at a Ace Hardware and paid about $2.00 for a full set of springs.