Results 1 to 3 of 3
Threaded View
-
06-19-2016, 03:43 PM #2
The Z_RAISE_BEFORE_HOMING is gone... But you shouldn't need it. The probing is smarter. Just make sure you have a good number in the
#define Z_RAISE_BEFORE_PROBING
The Z_RAISE_BEFORE_HOMING is gone... But you shouldn't need it. The probing is smarter. Just make sure you have a good number in the
#define Z_RAISE_BEFORE_PROBING
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion