Installing the glass bed

[rforeman]

What do you guys use to help ABS stick to glass?

My issue is that ABS sticks too well to the plastic surface that comes with my QIDI and my metal bed has high points in the middle and low points in front right and rear left corners. I am looking for a solution where I can easily remove a "flat" bed without having to re-level constantly. Thanks!

I use Aqua Net extra super hold hair spray. I spray in on to a paper towel or a lent free cloth and wipe it on the glass.

[djprinter]

I use Aqua Net extra super hold hair spray. I spray in on to a paper towel or a lent free cloth and wipe it on the glass.

I use the same, only I just take the glass out and spray it directly on the glass.

hairspray holds really well while the plate is still hot (I once pulled out chunks of glass trying to forcefully remove a part before it had cooled).

Once cool the part comes off easily, often removing itself.