Results 1 to 7 of 7
Hybrid View
-
05-19-2016, 07:39 AM #1
-
05-19-2016, 10:09 AM #2
- Join Date
- Feb 2015
- Posts
- 70
That would explain problem #1. I double checked my offsets and they look sane:
#define EXTRUDER_OFFSET_X {0.0, 27.00} // (in mm) for each extruder, offset of the hotend on the X axis
#define EXTRUDER_OFFSET_Y {0.0, 0.00} // (in mm) for each extruder, offset of the hotend on the Y axis
I followed this up with an M502 then M500 to make sure I was using the firmware coded values.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials