I need two tiny gears

[curious aardvark]

got a millimetre scale - I don't do inches :-)

And you'll need someone with a resin based sla type printer.

They will be able to make the gears - but I don't know how strong they will be.

Okay after guesstimateing it at about 5/16 of an inch it's around 8mm in real numbers.

I actually just see wheels, no gears. 8mm wheels - no problem.

8mm gears with many teeth - you will need sla machine.

[Tonyj]

Thank you curious aardvark for your quick reply and answering my question!

Now I need to find a person with a sla 3D printing machine to make this happen. Anyone out there have one and is willing to help me with this? I have Paypal.

Note that I do not need many teeth. Just not small teeth like a servo gear teeth. Here is an image of the closest gear I seen made to make this work. I like the size of these teeth.

smallgear.jpg

When the 3D person tried to make this gear smaller, it messed up. I need this made at a smaller size and a smaller middle hole of course. If teeth are going to be a problem, then maybe even a custom paddle setup.

Thanks,
Tony