Results 1 to 10 of 48
Thread: I need two tiny gears
Hybrid View
-
05-01-2016, 10:36 AM #1
got a millimetre scale - I don't do inches :-)
And you'll need someone with a resin based sla type printer.
They will be able to make the gears - but I don't know how strong they will be.
Okay after guesstimateing it at about 5/16 of an inch it's around 8mm in real numbers.
I actually just see wheels, no gears. 8mm wheels - no problem.
8mm gears with many teeth - you will need sla machine.Last edited by curious aardvark; 05-01-2016 at 11:18 AM.
-
05-01-2016, 11:30 AM #2
- Join Date
- May 2016
- Location
- Michigan
- Posts
- 22
Thank you curious aardvark for your quick reply and answering my question!
Now I need to find a person with a sla 3D printing machine to make this happen. Anyone out there have one and is willing to help me with this? I have Paypal.
Note that I do not need many teeth. Just not small teeth like a servo gear teeth. Here is an image of the closest gear I seen made to make this work. I like the size of these teeth.
smallgear.jpg
When the 3D person tried to make this gear smaller, it messed up. I need this made at a smaller size and a smaller middle hole of course. If teeth are going to be a problem, then maybe even a custom paddle setup.
Thanks,
TonyLast edited by Tonyj; 05-01-2016 at 11:39 AM.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials