Results 1 to 5 of 5
Hybrid View
-
04-18-2016, 10:32 AM #1
- Join Date
- Apr 2016
- Posts
- 9
Hello,
Thank you for the replies. After some experimenting, I was able to get the ABS to stick. My printing temp was 260 and bed temp 140.
The axiom series is bow fully enclosed. AS for the Kapton tape, I ma using the wolf bite which should be able to replace the tape.
I will have to try slowing the printer down alot
I am confident that this is the case becuase the ABS is squished a little on the first layer. It looks more like an oval.
The 0.4 mm thickness I am able to do because I have a 0.5mm hot end
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help