Results 1 to 10 of 12
Thread: Makerfarm iv3 z-axis lift speed
Threaded View
-
04-22-2016, 02:56 PM #12
- Join Date
- Apr 2015
- Location
- Lakeport, CA.
- Posts
- 174
I use the extended version of the clough42 shroud combined with a not commonly used (but easy to install) HE fan shroud that assists with reversing the HE cooling flow from the stock setup.
Hopefully..., the pic has uploaded correctly...
20150609_151651.jpg
One other comment: yah..., the exit end of the shroud is some distance from the nozzle..., but it seems to be fairly effective in that turning on the fan at 100% causes an almost immediate 6C drop in HE temp...., which the system eventually compensates for. Heh..., since I don't like to leave the HE just cooking the filament at the end of a print job, my post-job gcode turns the fan on to accelerate HE cooling. Very effective!
Last edited by lakester; 04-22-2016 at 03:03 PM.
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help