Results 1 to 10 of 40
Thread: Problems with PetG
Threaded View
-
05-12-2016, 04:16 AM #40
- Join Date
- May 2016
- Posts
- 14
After view the photos attached,I think you could have a trial with below:
1.Turn the printer temperature to 250C.PETG is better material than PLA,the melt point is similar as abs.
2.set the printing speed slowly.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials