Results 1 to 4 of 4
Threaded View
-
03-07-2016, 02:54 AM #1
Post processing : highlighting reliefs with Pebeo pens
I usually add a lot of reliefs on my prints. But as you may have noticed, it's hard to spray paint reliefs : painter's tape is a pain to apply in that instance.
I found a really great brand of oil-based pens that do the trick really well as you can see below (before/ after). Took me 2 minutes to apply. Then wait a few hours for it to dry completely.
IMG_20160306_163338.jpgIMG_20160306_163825.jpg
I really like these new products from Pebeo.
A few remarks :
- the oil naturally seems to want to follow the layer lines and slightly seeps if your paint application is a bit too generous. So when your relief is on the side when printing, you need to be careful.
- I have found that applying a spray paint coat before completely avoids this seepage.
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials