Results 1 to 10 of 26
Threaded View
-
12-28-2015, 04:29 AM #15
You are on the right track here. Each layer has to cool before the next is made. Turn on fans in your slicer and you'll see a difference.
Sometimes, printing tiny stuff, the fans are not enough. Then I usually print two models, with a distance, too allow more cooling time. Just keep the best looking one
Edit: The holes in flat surfaces though: thicker shell = more horizontal layers, as well as higher percent infill helps, if the machine is properly set up.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials