Results 1 to 3 of 3
Thread: A little PVA stuck in print head
Threaded View
-
12-08-2015, 12:39 AM #1
- Join Date
- Aug 2015
- Posts
- 29
A little PVA stuck in print head
I printed with a cut strand of PVA for support material. The PVA ran out during the print. BAD IDEA! I wound up with a length of (somewhat burned) PVA stuck inside the plastic tube that leads to the printhead.
Using a candle for heat I got most of that out. But there's just a little residue left. I've got one of those cleaning kits from ebay with the little fine wire- and that wire will not go through the .4mm hole by any persuasion! Nor will any light.
Now what? I'm soaking the head in acetone overnight. Other ideas?
Please explain to me how to...
Yesterday, 03:08 PM in 3D Printer Parts, Filament & Materials