they should all print as they're all pla based so don;'t have high extrusion temps.

One thing to bear in mind. Filaments like copperfill and anything that's conductive or states it has carbon fibre will wear the nozzle.

If you want something with a stone like finish. Then the best thing I've used is bronzefill. Unsanded, polished etc it looks and feels like rough stone/ceramic.

I printed a rather nice ganeesh that looks like it was carved from a piece of rock.

It's probably abetter use for bronzefill than all the post processing to make it look bronzy.

If you want abronze finish get some of the reprapper tech bronze filament. Doesn't need post processing.